使用 Hardhat 部署 HelloWorld 合约

请在GitHub参阅完整的代码库。

本节将展示如何使用创建新的Solidity合约，配置Berachain网络详细信息，将合约部署到Berachain，以及验证合约。

先决条件

开始之前，请确保你的本地设备上满足以下条件：

持有$BERA代币的钱包（合约部署费用，参阅文档）
NVM或Node v18.18.2
pnpm, yarn 或 npm

创建HelloWorld代码设置

首先，为HelloWorld创建一个新的文件夹：

mkdir create-helloworld-contract-using-hardhat;
cd create-helloworld-contract-using-hardhat;

然后，启动Hardhat，并创建viem模板：

# FROM ./create-helloworld-contract-using-hardhat;

npx hardhat init;

# [Expected Prompts]:
# 888    888                      888 888               888
# 888    888                      888 888               888
# 888    888                      888 888               888
# 8888888888  8888b.  888d888 .d88888 88888b.   8888b.  888888
# 888    888     "88b 888P"  d88" 888 888 "88b     "88b 888
# 888    888 .d888888 888    888  888 888  888 .d888888 888
# 888    888 888  888 888    Y88b 888 888  888 888  888 Y88b.
# 888    888 "Y888888 888     "Y88888 888  888 "Y888888  "Y888
#
# 👷 Welcome to Hardhat v2.18.3 👷‍
#
# ✔ What do you want to do? · Create a TypeScript project (with Viem)
# ✔ Hardhat project root: · /path/to/create-helloworld-contract-using-hardhat
# ✔ Do you want to add a .gitignore? (Y/n) · y
# ✔ Do you want to install this sample project's dependencies with npm (hardhat @nomicfoundation/#  hardhat-toolbox-viem)? (Y/n) · y

安装dotenv依赖项，以便使用环境变量。

# FROM ./create-helloworld-contract-using-hardhat;

pnpm add -D dotenv;

创建HelloWorld合约

上述操作，Hardhat创建了需要的文件。现在，已经准备好一切，可以创建一个新的Solidity合约了。

首先，将Hardhat创建的文件重命名为HelloWorld.sol：

# FROM ./create-helloworld-contract-using-hardhat;

# Renames `Lock.sol` to `HelloWorld.sol`
mv contracts/Lock.sol contracts/HelloWorld.sol;

然后，替换重命名的HelloWorld.sol文件中的现有代码。

文件位置：./contract/HelloWorld.sol，运行以下代码：

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.9;

contract HelloWorld {
    // Events that allows for emitting a message
    event NewGreeting(address sender, string message);

    // Variables
    string greeting;

    // Main constructor run at deployment
    constructor(string memory _greeting) {
        greeting = _greeting;
        emit NewGreeting(msg.sender, _greeting);
    }

    // Get function
    function getGreeting() public view returns (string memory) {
        return greeting;
    }

    // Set function
    function setGreeting(string memory _greeting) public {
        greeting = _greeting;
        emit NewGreeting(msg.sender, _greeting);
    }
}

我们已经创建了一个新的Solidity合约，接下来测试合约能否成功编译：

# FROM ./create-helloworld-contract-using-hardhat;

npx hardhat compile;

# [Expected Output]:
# Compiled 1 Solidity file successfully (evm target: paris).

你还可以通过对package.json文件进行一些修改，简化编译步骤。

文件位置：./package.json，运行以下代码：

{
  "name": "create-helloworld-contract-using-hardhat",
  "scripts": {

    "compile": "./node_modules/.bin/hardhat compile"
  }, 
  "devDependencies": {
    "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0",
    "dotenv": "^16.3.1",
    "hardhat": "^2.18.3"
  }
}

现在，可以使用下方代码编译合约：

# FROM ./create-helloworld-contract-using-hardhat;

pnpm compile; # npm run compile or yarn run compil;

# [Expected Output]:
# Nothing to compile

测试HelloWorld合约

合约成功创建后，需要通过编写一些测试程序来确保合约能正常运行。

首先，重命名Hardhat在/test目录中创建的测试文件：

# FROM ./create-helloworld-contract-using-hardhat;

# Renames `Lock.ts` to `HelloWorld.test.ts`
mv test/Lock.ts test/HellWorld.test.ts;

然后，替换重命名的HelloWorld.test.ts文件中的现有代码。

文件位置：./test/HelloWorld.test.ts，运行以下代码：

// Imports
// ========================================================
import { loadFixture } from "@nomicfoundation/hardhat-toolbox-viem/network-helpers";
import { expect } from "chai";
import hre from "hardhat";

// Tests
// ========================================================
describe("HelloWorld", function () {
  // We define a fixture to reuse the same setup in every test.
  // We use loadFixture to run this setup once, snapshot that state,
  // and reset Hardhat Network to that snapshot in every test.
  async function deployFixture() {
    // Contracts are deployed using the first signer/account by default
    const [owner, otherAccount] = await hre.viem.getWalletClients();

    const contract = await hre.viem.deployContract("HelloWorld", [
      "Test Message",
    ]);
    const publicClient = await hre.viem.getPublicClient();

    return {
      owner,
      otherAccount,
      publicClient,
      contract,
    };
  }

  /**
   *
   */
  describe("Deployment", function () {
    /**
     *
     */
    it("Should deploy with original message", async function () {
      // Setup
      const { contract } = await loadFixture(deployFixture);

      // Init + Expectations
      expect(await contract.read.getGreeting()).to.equal("Test Message");
    });

    /**
     *
     */
    it("Should set a new message", async function () {
      // Setup
      const { contract, owner } = await loadFixture(deployFixture);

      // Init
      await contract.write.setGreeting(["Hello There"]);

      // Expectations
      expect(await contract.read.getGreeting()).to.equal("Hello There");
    });
  });
});

接下来，运行下方代码以运行测试程序：

# FROM ./create-helloworld-contract-using-hardhat;

npx hardhat test;

# [Expected Output]:
#   HelloWorld
#     Deployment
#       ✔ Should deploy with original message (2723ms)
#       ✔ Should set a new message
#
#
#   2 passing (3s)

你还可以通过对package.json文件进行一些修改，以便更轻松地运行pnpm test测试程序。

文件位置：./package.json，运行以下代码：

{
  "name": "create-helloworld-contract-using-hardhat",
  "scripts": {
    "compile": "./node_modules/.bin/hardhat compile",
    "test": "./node_modules/.bin/hardhat test"
  },
  "devDependencies": {
    "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0",
    "dotenv": "^16.3.1",
    "hardhat": "^2.18.3"
  }
}

为Berachain合约部署配置Hardhat

通过Hardhat创建viem模板的方式部署的合约，目前尚未完全支持开箱即用的自定义链，但在 Berachain主网启动后将会支持。

首先，为了正确设置hardhat.config.ts，需要使用dotenv安装包创建一个.env文件，用于声明环境变量，供配置读取。

# FROM ./create-helloworld-contract-using-hardhat;

touch .env;

然后，在新建的.env文件中，运行以下代码，文件位置：./.env。

# Chain Configurations
CHAIN_ID=80084
NETWORK_NAME="berachainbArtio"
CURRENCY_DECIMALS=18
CURRENCY_NAME="BERA Token"
CURRENCY_SYMBOL="BERA"

# API key for Beratrail Block Explorer, can be any value for now
BLOCK_EXPLORER_NAME=Beratrail Block Explorer
BLOCK_EXPLORER_API_KEY=xxxxx
BLOCK_EXPLORER_API_URL=https://api.routescan.io/v2/network/testnet/evm/80084/etherscan/api/
BLOCK_EXPLORER_URL=https://bartio.beratrail.io/

# Wallet + RPC configurations
RPC_URL=https://bartio.rpc.berachain.com/
# Private key generated from Hardhat local - replace with Berachain
# NEVER SHARE THIS WITH ANYONE AND AVOID COMMITTING THIS WITH YOUR GIT REPOSITORY
WALLET_PRIVATE_KEY=0xYOUR_WALLET_PRIVATE_KEY

代币合约参数支持自定义，总体配置步骤是相同的。

设置好环境变量后，需要将它们加载到hardhat.config.ts文件。

文件位置：./hardhat.config.ts，运行以下代码：

// Imports
// ========================================================
import { HardhatUserConfig } from "hardhat/config";
import "@nomicfoundation/hardhat-toolbox-viem";
import dotenv from "dotenv";

// Load Environment Variables
// ========================================================
dotenv.config();

// Main Hardhat Config
// ========================================================
const config: HardhatUserConfig = {
  solidity: "0.8.19",
  networks: {
    // For localhost network
    hardhat: {
      chainId: 1337,
    },
    // NOTE: hardhat viem currently doesn't yet support this method for custom chains through Hardhat config ↴
    berachainTestnet: {
      chainId: parseInt(`${process.env.CHAIN_ID}`),
      url: `${process.env.RPC_URL || ""}`,
      accounts: process.env.WALLET_PRIVATE_KEY
        ? [`${process.env.WALLET_PRIVATE_KEY}`]
        : [],
    },
  },
};

// Exports
// ========================================================
export default config;

在Berachain部署HelloWorld合约

我们已经完成了所有配置设置，现在尝试运行一个本地节点，并将其部署到本地环境。

首先，通过对package.json文件进行一些修改，让部署运行更轻松。

文件位置： ./package.json，运行以下代码：

{
  "name": "create-helloworld-contract-using-hardhat",
  "scripts": {
    "compile": "./node_modules/.bin/hardhat compile",
    "node": "./node_modules/.bin/hardhat node", 
    "deploy:localhost": "./node_modules/.bin/hardhat run scripts/deploy.ts --network localhost", 
    "deploy:berachain": "./node_modules/.bin/hardhat run scripts/deploy.ts --network berachainTestnet", 
    "test": "./node_modules/.bin/hardhat test"
  },
  "devDependencies": {
    "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0",
    "dotenv": "^16.3.1",
    "hardhat": "^2.18.3"
  }
}

接下来，配置./scripts/deploy.ts脚本，以确保合约正确部署。

文件位置： ./scripts/deploy.ts，运行以下代码：

// Imports
// ========================================================
import hre from "hardhat";

// Main Deployment Script
// ========================================================
async function main() {
  const contract = await hre.viem.deployContract("HelloWorld", [
    "Hello from the contract!",
  ]);
  console.log(`HelloWorld deployed to ${contract.address}`);
}

// Init
// ========================================================
// We recommend this pattern to be able to use async/await everywhere
// and properly handle errors.
main().catch((error) => {
  console.error(error);
  process.exitCode = 1;
});

部署脚本配置好后，我们可以在一个终端运行本地节点，并在另一个终端部署合约。

终端 1：部署合约

# FROM ./create-helloworld-contract-using-hardhat;

pnpm node;

# [Expected Output]:
# Started HTTP and WebSocket JSON-RPC server at http://127.0.0.1:8545/
#
# Accounts
# ========
#
# WARNING: These accounts, and their private keys, are publicly known.
# Any funds sent to them on Mainnet or any other live network WILL BE LOST.
#
# Account #0: 0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266 (10000 ETH)
# Private Key: 0xac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80bash

使用上方代码中提供的私钥Private Key，替换.env 文件中的WALLET_PRIVATE_KEY。

文件位置：./.env，运行以下代码：

WALLET_PRIVATE_KEY=0xac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80

终端 2：运行本地节点

# FROM ./create-helloworld-contract-using-hardhat;

pnpm deploy:localhost;
# [Expected Similar Output]:
# HelloWorld deployed to 0x5fbdb2315678afecb367f032d93f642f64180aa3

现在，合约已成功部署到本地节点，接下来配置部署脚本，以便合约直接部署到Berachain网络。

要使viem支持自定义链，需要进行额外配置，下方代码展示了如何为Berachain设置额外配置。当Berachain主网上线时，这些额外配置可能不再需要。

文件位置：./scripts/deploy.ts，运行以下代码：

// Imports
// ========================================================
import hre from "hardhat";
import fs from "fs"; 
import { defineChain } from "viem"; 
import { privateKeyToAccount } from "viem/accounts"; 

// Config Needed For Custom Chain
// ========================================================
const chainConfiguration = defineChain({

  id: parseInt(`${process.env.CHAIN_ID}`), 
  name: `${process.env.NETWORK_NAME}`, 
  network: `${process.env.NETWORK_NAME}`, 
  nativeCurrency: {

    decimals: parseInt(`${process.env.CURRENCY_DECIMALS}`), 
    name: `${process.env.CURRENCY_NAME}`, 
    symbol: `${process.env.CURRENCY_SYMBOL}`, 
  }, 
  rpcUrls: {

    default: {

      http: [`${process.env.RPC_URL}`], 
    }, 
    public: {

      http: [`${process.env.RPC_URL}`], 
    }, 
  }, 
  blockExplorers: {

    default: {
      name: `${process.env.BLOCK_EXPLORER_NAME}`,
      url: `${process.env.BLOCK_EXPLORER_URL}`,
    }, 
  }, 
}); 

// Main Deployment Script
// ========================================================
async function main() {
  // NOTE: hardhat with viem currently doesn't support custom chains so there needs to be some custom functionality ↴
  if (hre.network.name === "berachainTestnet") {

    // Retrieve contract artifact ABI & Bytecode
    const contractName = "HelloWorld"; 
    const artifactFile = fs.readFileSync(
      `${hre.artifacts._artifactsPath}/contracts/${contractName}.sol/${contractName}.json`
    ); 
    const artifactJSON = JSON.parse(artifactFile.toString()) as any; 

    // Configure wallet client
    const walletClient = await hre.viem.getWalletClient(

      // wallet account
      privateKeyToAccount(hre.network.config.accounts?.[0] as `0x${string}`), 
      // configured chain
      {

        chain: chainConfiguration, 
      } 
    ); 

    // Deploy contract
    const hash = await walletClient.deployContract({

      abi: artifactJSON.abi, 
      bytecode: artifactJSON.bytecode, 
      args: ["Hello From Deployed Contract"], 
    }); 
    console.log({ hash }); 

    // Retrieve deployed contract address
    const publicClient = await hre.viem.getPublicClient({

      chain: chainConfiguration, 
    }); 
    const receipt = await publicClient.waitForTransactionReceipt({ hash }); 
    console.log(`${contractName} deployed to ${receipt?.contractAddress}`); 
  } else {

    const contract = await hre.viem.deployContract("HelloWorld", [
      "Hello from the contract!",
    ]);
    console.log(`HelloWorld deployed to ${contract.address}`);
  } 
}

// Init
// ========================================================
// We recommend this pattern to be able to use async/await everywhere
// and properly handle errors.
main().catch((error) => {
  console.error(error);
  process.exitCode = 1;
});

文件位置：./.env，运行以下代码：

WALLET_PRIVATE_KEY=0xYOUR_WALLET_PRIVATE_KEY

现在，可以直接将合约部署到Berachain了。

# FROM ./create-helloworld-contract-using-hardhat;

pnpm deploy:berachain;

# [Expected Similar Output]:
# {
#   hash: '0x3ff0120c126b20d9f286657521c9d2d1edbb38f60dcd5fc6b95638a192588182'
# }
# HelloWorld deployed to 0x38f8423cc4390938c01616d7a9f761972e7f116a

你可以运行下方代码，在Berachain Beratrail区块浏览器中查看部署的合约：

open https://bartio.beratrail.io/address/0x38f8423cc4390938c01616d7a9f761972e7f116a

# [Expected Result Should Open Your Browser]

你会看到合约已经成功部署，但未被验证，因为它仍显示合约字节码，接下来需要验证合约。

验证HelloWorld合约

为了验证合约，需要在hardhat.config.ts文件中添加一个额外配置。

文件位置：./hardhat.config.ts，运行以下代码：

// Imports
// ========================================================
import { HardhatUserConfig } from "hardhat/config";
import "@nomicfoundation/hardhat-toolbox-viem";
import dotenv from "dotenv";

// Load Environment Variables
// ========================================================
dotenv.config();

// Main Hardhat Config
// ========================================================
const config: HardhatUserConfig = {
  solidity: "0.8.19",
  networks: {
    hardhat: {
      chainId: 1337,
    },
    // NOTE: hardhat viem currently doesn't yet support this method for custom chains through Hardhat config ↴
    berachainTestnet: {
      chainId: parseInt(`${process.env.CHAIN_ID}`),
      url: `${process.env.RPC_URL || ""}`,
      accounts: process.env.WALLET_PRIVATE_KEY
        ? [`${process.env.WALLET_PRIVATE_KEY}`]
        : [],
    },
  }, 
  // For Contract Verification
  etherscan: {

    apiKey: `${process.env.BLOCK_EXPLORER_API_KEY}`, 
    customChains: [

      {

        network: "Berachain Testnet", 
        chainId: parseInt(`${process.env.CHAIN_ID}`), 
        urls: {

          apiURL: `${process.env.BLOCK_EXPLORER_API_URL}`, 
          browserURL: `${process.env.BLOCK_EXPLORER_URL}`, 
        }, 
      }, 
    ], 
  }, 
};

// Exports
// ========================================================
export default config;

完成额外配置后，通过向package.json添加 run 命令来查看更改。

文件位置：./package.json，运行以下代码：

{
  "name": "create-helloworld-contract-using-hardhat",
  "scripts": {
    "compile": "./node_modules/.bin/hardhat compile",
    "node": "./node_modules/.bin/hardhat node",
    "deploy:localhost": "./node_modules/.bin/hardhat run scripts/deploy.ts --network localhost",
    "deploy:berachain": "./node_modules/.bin/hardhat run scripts/deploy.ts --network berachainTestnet",
    "test": "./node_modules/.bin/hardhat test",
    "verify": "./node_modules/.bin/hardhat verify --network berachainTestnet"
  },
  "devDependencies": {
    "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0",
    "dotenv": "^16.3.1",
    "hardhat": "^2.18.3"
  }
}

最后，使用合约部署地址和初始参数Hello From Deployed Contract，运行下方代码验证合约。

# FROM ./create-helloworld-contract-using-hardhat;

# Equivalent to: npx hardhat verify 0x38f8423cc4390938c01616d7a9f761972e7f116a "Hello From Deployed Contract"
pnpm verify 0x38f8423cc4390938c01616d7a9f761972e7f116a "Hello From Deployed Contract";

# [Expected Output]:
#
# Successfully submitted source code for contract
# contracts/HelloWorld.sol:HelloWorld at 0x38f8423cc4390938c01616d7a9f761972e7f116a
# for verification on the block explorer. Waiting for verification result...
#
# Successfully verified contract HelloWorld on the block explorer.
# https://bartio.beratrail.io/address/0x38f8423cc4390938c01616d7a9f761972e7f116a#code

在Beratail可以看到，合约已成功验证，并且可以查看到合约Solidity代码。

完整代码库

上一页开发者指南下一页使用 Foundry 部署 ERC20 合约

最后更新于6个月前

# FROM ./create-helloworld-contract-using-hardhat; npx hardhat init; # [Expected Prompts]: # 888 888 888 888 888 # 888 888 888 888 888 # 888 888 888 888 888 # 8888888888 8888b. 888d888 .d88888 88888b. 8888b. 888888 # 888 888 "88b 888P" d88" 888 888 "88b "88b 888 # 888 888 .d888888 888 888 888 888 888 .d888888 888 # 888 888 888 888 888 Y88b 888 888 888 888 888 Y88b. # 888 888 "Y888888 888 "Y88888 888 888 "Y888888 "Y888 # # 👷 Welcome to Hardhat v2.18.3 👷‍ # # ✔ What do you want to do? · Create a TypeScript project (with Viem) # ✔ Hardhat project root: · /path/to/create-helloworld-contract-using-hardhat # ✔ Do you want to add a .gitignore? (Y/n) · y # ✔ Do you want to install this sample project's dependencies with npm (hardhat @nomicfoundation/# hardhat-toolbox-viem)? (Y/n) · y

// SPDX-License-Identifier: UNLICENSED pragma solidity ^0.8.9; contract HelloWorld { // Events that allows for emitting a message event NewGreeting(address sender, string message); // Variables string greeting; // Main constructor run at deployment constructor(string memory _greeting) { greeting = _greeting; emit NewGreeting(msg.sender, _greeting); } // Get function function getGreeting() public view returns (string memory) { return greeting; } // Set function function setGreeting(string memory _greeting) public { greeting = _greeting; emit NewGreeting(msg.sender, _greeting); } }

{ "name": "create-helloworld-contract-using-hardhat", "scripts": { "compile": "./node_modules/.bin/hardhat compile" }, "devDependencies": { "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0", "dotenv": "^16.3.1", "hardhat": "^2.18.3" } }

// Imports // ======================================================== import { loadFixture } from "@nomicfoundation/hardhat-toolbox-viem/network-helpers"; import { expect } from "chai"; import hre from "hardhat"; // Tests // ======================================================== describe("HelloWorld", function () { // We define a fixture to reuse the same setup in every test. // We use loadFixture to run this setup once, snapshot that state, // and reset Hardhat Network to that snapshot in every test. async function deployFixture() { // Contracts are deployed using the first signer/account by default const [owner, otherAccount] = await hre.viem.getWalletClients(); const contract = await hre.viem.deployContract("HelloWorld", [ "Test Message", ]); const publicClient = await hre.viem.getPublicClient(); return { owner, otherAccount, publicClient, contract, }; } /** * */ describe("Deployment", function () { /** * */ it("Should deploy with original message", async function () { // Setup const { contract } = await loadFixture(deployFixture); // Init + Expectations expect(await contract.read.getGreeting()).to.equal("Test Message"); }); /** * */ it("Should set a new message", async function () { // Setup const { contract, owner } = await loadFixture(deployFixture); // Init await contract.write.setGreeting(["Hello There"]); // Expectations expect(await contract.read.getGreeting()).to.equal("Hello There"); }); }); });

# FROM ./create-helloworld-contract-using-hardhat; npx hardhat test; # [Expected Output]: # HelloWorld # Deployment # ✔ Should deploy with original message (2723ms) # ✔ Should set a new message # # # 2 passing (3s)

{ "name": "create-helloworld-contract-using-hardhat", "scripts": { "compile": "./node_modules/.bin/hardhat compile", "test": "./node_modules/.bin/hardhat test" }, "devDependencies": { "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0", "dotenv": "^16.3.1", "hardhat": "^2.18.3" } }

# Chain Configurations CHAIN_ID=80084 NETWORK_NAME="berachainbArtio" CURRENCY_DECIMALS=18 CURRENCY_NAME="BERA Token" CURRENCY_SYMBOL="BERA" # API key for Beratrail Block Explorer, can be any value for now BLOCK_EXPLORER_NAME=Beratrail Block Explorer BLOCK_EXPLORER_API_KEY=xxxxx BLOCK_EXPLORER_API_URL=https://api.routescan.io/v2/network/testnet/evm/80084/etherscan/api/ BLOCK_EXPLORER_URL=https://bartio.beratrail.io/ # Wallet + RPC configurations RPC_URL=https://bartio.rpc.berachain.com/ # Private key generated from Hardhat local - replace with Berachain # NEVER SHARE THIS WITH ANYONE AND AVOID COMMITTING THIS WITH YOUR GIT REPOSITORY WALLET_PRIVATE_KEY=0xYOUR_WALLET_PRIVATE_KEY

// Imports // ======================================================== import { HardhatUserConfig } from "hardhat/config"; import "@nomicfoundation/hardhat-toolbox-viem"; import dotenv from "dotenv"; // Load Environment Variables // ======================================================== dotenv.config(); // Main Hardhat Config // ======================================================== const config: HardhatUserConfig = { solidity: "0.8.19", networks: { // For localhost network hardhat: { chainId: 1337, }, // NOTE: hardhat viem currently doesn't yet support this method for custom chains through Hardhat config ↴ berachainTestnet: { chainId: parseInt(`${process.env.CHAIN_ID}`), url: `${process.env.RPC_URL || ""}`, accounts: process.env.WALLET_PRIVATE_KEY ? [`${process.env.WALLET_PRIVATE_KEY}`] : [], }, }, }; // Exports // ======================================================== export default config;

{ "name": "create-helloworld-contract-using-hardhat", "scripts": { "compile": "./node_modules/.bin/hardhat compile", "node": "./node_modules/.bin/hardhat node", "deploy:localhost": "./node_modules/.bin/hardhat run scripts/deploy.ts --network localhost", "deploy:berachain": "./node_modules/.bin/hardhat run scripts/deploy.ts --network berachainTestnet", "test": "./node_modules/.bin/hardhat test" }, "devDependencies": { "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0", "dotenv": "^16.3.1", "hardhat": "^2.18.3" } }

// Imports // ======================================================== import hre from "hardhat"; // Main Deployment Script // ======================================================== async function main() { const contract = await hre.viem.deployContract("HelloWorld", [ "Hello from the contract!", ]); console.log(`HelloWorld deployed to ${contract.address}`); } // Init // ======================================================== // We recommend this pattern to be able to use async/await everywhere // and properly handle errors. main().catch((error) => { console.error(error); process.exitCode = 1; });

# FROM ./create-helloworld-contract-using-hardhat; pnpm node; # [Expected Output]: # Started HTTP and WebSocket JSON-RPC server at http://127.0.0.1:8545/ # # Accounts # ======== # # WARNING: These accounts, and their private keys, are publicly known. # Any funds sent to them on Mainnet or any other live network WILL BE LOST. # # Account #0: 0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266 (10000 ETH) # Private Key: 0xac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80bash

// Imports // ======================================================== import hre from "hardhat"; import fs from "fs"; import { defineChain } from "viem"; import { privateKeyToAccount } from "viem/accounts"; // Config Needed For Custom Chain // ======================================================== const chainConfiguration = defineChain({ id: parseInt(`${process.env.CHAIN_ID}`), name: `${process.env.NETWORK_NAME}`, network: `${process.env.NETWORK_NAME}`, nativeCurrency: { decimals: parseInt(`${process.env.CURRENCY_DECIMALS}`), name: `${process.env.CURRENCY_NAME}`, symbol: `${process.env.CURRENCY_SYMBOL}`, }, rpcUrls: { default: { http: [`${process.env.RPC_URL}`], }, public: { http: [`${process.env.RPC_URL}`], }, }, blockExplorers: { default: { name: `${process.env.BLOCK_EXPLORER_NAME}`, url: `${process.env.BLOCK_EXPLORER_URL}`, }, }, }); // Main Deployment Script // ======================================================== async function main() { // NOTE: hardhat with viem currently doesn't support custom chains so there needs to be some custom functionality ↴ if (hre.network.name === "berachainTestnet") { // Retrieve contract artifact ABI & Bytecode const contractName = "HelloWorld"; const artifactFile = fs.readFileSync( `${hre.artifacts._artifactsPath}/contracts/${contractName}.sol/${contractName}.json` ); const artifactJSON = JSON.parse(artifactFile.toString()) as any; // Configure wallet client const walletClient = await hre.viem.getWalletClient( // wallet account privateKeyToAccount(hre.network.config.accounts?.[0] as `0x${string}`), // configured chain { chain: chainConfiguration, } ); // Deploy contract const hash = await walletClient.deployContract({ abi: artifactJSON.abi, bytecode: artifactJSON.bytecode, args: ["Hello From Deployed Contract"], }); console.log({ hash }); // Retrieve deployed contract address const publicClient = await hre.viem.getPublicClient({ chain: chainConfiguration, }); const receipt = await publicClient.waitForTransactionReceipt({ hash }); console.log(`${contractName} deployed to ${receipt?.contractAddress}`); } else { const contract = await hre.viem.deployContract("HelloWorld", [ "Hello from the contract!", ]); console.log(`HelloWorld deployed to ${contract.address}`); } } // Init // ======================================================== // We recommend this pattern to be able to use async/await everywhere // and properly handle errors. main().catch((error) => { console.error(error); process.exitCode = 1; });

# FROM ./create-helloworld-contract-using-hardhat; pnpm deploy:berachain; # [Expected Similar Output]: # { # hash: '0x3ff0120c126b20d9f286657521c9d2d1edbb38f60dcd5fc6b95638a192588182' # } # HelloWorld deployed to 0x38f8423cc4390938c01616d7a9f761972e7f116a

// Imports // ======================================================== import { HardhatUserConfig } from "hardhat/config"; import "@nomicfoundation/hardhat-toolbox-viem"; import dotenv from "dotenv"; // Load Environment Variables // ======================================================== dotenv.config(); // Main Hardhat Config // ======================================================== const config: HardhatUserConfig = { solidity: "0.8.19", networks: { hardhat: { chainId: 1337, }, // NOTE: hardhat viem currently doesn't yet support this method for custom chains through Hardhat config ↴ berachainTestnet: { chainId: parseInt(`${process.env.CHAIN_ID}`), url: `${process.env.RPC_URL || ""}`, accounts: process.env.WALLET_PRIVATE_KEY ? [`${process.env.WALLET_PRIVATE_KEY}`] : [], }, }, // For Contract Verification etherscan: { apiKey: `${process.env.BLOCK_EXPLORER_API_KEY}`, customChains: [ { network: "Berachain Testnet", chainId: parseInt(`${process.env.CHAIN_ID}`), urls: { apiURL: `${process.env.BLOCK_EXPLORER_API_URL}`, browserURL: `${process.env.BLOCK_EXPLORER_URL}`, }, }, ], }, }; // Exports // ======================================================== export default config;

{ "name": "create-helloworld-contract-using-hardhat", "scripts": { "compile": "./node_modules/.bin/hardhat compile", "node": "./node_modules/.bin/hardhat node", "deploy:localhost": "./node_modules/.bin/hardhat run scripts/deploy.ts --network localhost", "deploy:berachain": "./node_modules/.bin/hardhat run scripts/deploy.ts --network berachainTestnet", "test": "./node_modules/.bin/hardhat test", "verify": "./node_modules/.bin/hardhat verify --network berachainTestnet" }, "devDependencies": { "@nomicfoundation/hardhat-toolbox-viem": "^1.0.0", "dotenv": "^16.3.1", "hardhat": "^2.18.3" } }

# FROM ./create-helloworld-contract-using-hardhat; # Equivalent to: npx hardhat verify 0x38f8423cc4390938c01616d7a9f761972e7f116a "Hello From Deployed Contract" pnpm verify 0x38f8423cc4390938c01616d7a9f761972e7f116a "Hello From Deployed Contract"; # [Expected Output]: # # Successfully submitted source code for contract # contracts/HelloWorld.sol:HelloWorld at 0x38f8423cc4390938c01616d7a9f761972e7f116a # for verification on the block explorer. Waiting for verification result... # # Successfully verified contract HelloWorld on the block explorer. # https://bartio.beratrail.io/address/0x38f8423cc4390938c01616d7a9f761972e7f116a#code